Problem: A sulfur deficiency is relatively rare and will manifest itself as all-over chlorosis (yellowing of leaves), usually starting with the newer leaves and at first may look like a nitrogen deficiency.
The parts underneath the leaves may take on a pinkish red or orange color. The buds on a flowering plant may start dying off. Unlike most other deficiencies that cause yellowing of the leaves, a sulfur deficiency will start at the back of the leaf and move it’s way forward as opposed to starting at the tips.
Solution: Check and correct your pH to make sure that your sulfur isn’t being locked out. Sulfur moves slowly through the plant so it may take a few days after you fix the problem before you start noticing an improvement in your plant.
- Bronze or brown patches
- Brown or slimy roots
- Brown or yellow leaf tips/edges
- Buds dying
- Buds look odd
- Bugs are visible
- Curling or clawing leaves
- Dark leaves
- Drooping plant
- Holes in leaves
- Mold or powder
- Pink or purple on leaves
- Red stems
- Shiny or smooth leaves
- Spots or markings
- Twisted growth
- Wilting leaves
- Yellow between leaf veins
- Yellow leaves
This page is part of our Plant Doctor series. You can use our tool to filter by symptom and help diagnose your plant.Problem: A cannabis sulfur deficiency causes yellowing of leaves, usually starting with the newer leaves. At first it may look like a nitrogen deficiency.
Deficiencies and excesses in Cannabis
Nutrient imbalance in marijuana plants?
In this post we will focus on the macro and micro-nutrients necessary for the development of cannabis plants. These elements are available in the nutrients, so the chosen type of fertiliser and its correct use will lead us to a crop without deficiencies or excesses, thanks to a properly planned and balanced feeding.
There are different factors to take into account, so we’ll try to explain them in a simple way so that all growers can dispel all the possible doubts which may arise relating to the nutrition of their cannabis plants.
What is a deficiency?
Deficiencies are often – although not as a general rule – a lack or inadequate supply of some nutritional element in a precise moment of the plant’s life.
To avoid deficiencies plants must be fed with a complete fertiliser, specially designed for cannabis farming. PH level must be controlled, stabilised and adjusted depending on the type of crop, either in hydroponic or soil crops, and for both potted and in-ground plants.
What is an excess?
Excesses of nutrients are salt accumulations in the metabolism of the plants in a particular stage of their life. To avoid excesses when growing cannabis, we will have to use constant and balanced feeding adapted to each type of culture, substrate and genetics. Each phenotype has its own needs, and to know them ensures best results and avoids nutritional issues.
Table of deficiencies and excesses
Macro-elements or Macro-nutrients
Nitrogen is the most required macro-element by marijuana plants throughout their life cycle. A nitrogen deficiency can be easily detected when we observe chlorosis between the veins of the older, lower leafs. If the deficiency isn’t treated, the plant will suffer a massive defoliation and the growth will be seriously compromised.
An excess of nitrogen can be detected by the colour and shape of the leafs of the plants. These become dark green and can adopt a claw-like form, curling down.
Phosphorus is necessary at all life stages of the cannabis plant. The lack of this nutrient is detected in the leafs, which become blue-green and develop brown spots, along with slow growth. The veins and stems turn purple and the leaves curl downwards developing necrotic areas.
An excess of phosphorus usually causes a nutrient lockout which, in turn, causes deficiencies of calcium, copper, iron, magnesium and zinc.
Potassium develops the role of protector against diseases, actively participating in the cellular development along with many other functions. With a lack of potassium, plants are more prone to get all kinds of diseases.
The leaves turn dark green, spots appear and they end up dying. An excess of potassium in plants acts by locking out other elements, resulting in a deficiency of magnesium, manganese, zinc and iron.
Magnesium is a secondary nutrient essential for marijuana plants, which is used in large quantities during all phases of the plant life. Deficiencies of this nutrient are usual in soils with a PH value lower than 7.0. Magnesium is the central atom of the chlorophyll molecule, and it is also responsible for enhancing both the absorption of other nutrients and the creation of carbohydrates and sugars.
A magnesium deficiency is initially detected on the oldest, lower leafs, causing chlorosis between their veins, which turn dark green. As the deficiency advances, more and more young leafs are affected by dark spots and chlorosis. If the deficiency isn’t treated, the leaves will curve upwards and, in few days, a massive defoliation will affect the plant.
Sulphur is essential for the production of hormones and vitamins, it’s part of the amino acids and is directly involved in the flavour. A sulphur deficiency causes the oldest leaves to develop a lime-green, yellowish colour. As the deficiency progresses, the leaves turn yellow while keeping their veins green, the petioles turn purple and the stems woody.
Most times, a deficiency of this trace element is usually preceded by a nutrient lockout caused by an excess of calcium or a PH level too high. The solution to this problem is to keep the PH between 5.5 and 6.0 by adding sulphur in ore form for a quick assimilation. If a sulphur excess is produced, we should flush the roots.
Calcium is a very important element for cannabis plants, since they need almost the same amount of macro nutrients than calcium throughout their life. It’s essential for the creation and growth of the cells. A Calcium deficiency causes slow plant growth, weak stems and dark green leafs. To treat this deficiency, add some nutrient rich in calcium to the nutrient solution until the deficiency disappears.
An excess of calcium affects negatively to the overall growth of the plant, locking out other elements like potassium, magnesium, manganese and iron. In hydroponic systems, an excess of calcium combined with sulphur causes precipitation in the form of plaster, which remains at the bottom of the tank and clogs the irrigation tubes. In this case, we should change the nutrient solution and carefully check Ca levels.
The most relevant micro-nutrients
Micro-nutrients are nutritive elements which act as catalysts in the metabolic processes of the plants, also in the use of other elements. For a correct use of these nutrients, they should be present in small quantities dissolved in fertilisers.
Deficiencies of zinc will surely appear when growing marijuana with an excessively alkaline substrate. It acts as catalyst of various auxins, enzymes and is also essential for the growth of the stems. A zinc deficiency is also usually caused by a PH level higher than 7.0, producing chlorosis between the veins of the youngest leaves, which grow thinner, twisted and finally dry out. During bloom, the development of new buds and leaves stops until this problem is solved.
To treat zinc deficiencies we must feed the plant with micro-elements that contain zinc in chelated form to ensure rapid absorption and recovery of the plant.
Advanced Fe deficiency
Iron is a necessary nutritive element for plants since it’s directly related to the use of energy by sugars. It’s easy to find iron deficiencies in plants grown in alkaline soils. This deficiency tends to be present in soils with a PH level above 6.5. Early symptoms can be observed in the youngest leaves, which turn yellowish while keeping green veins. If the deficiency continues, the plant will suffer serious defoliation.
An iron deficiency can be preceded by a nutrient lockout caused by an excess of copper. Other elements like zinc or manganese can cause a null absorption of iron by the plants, which will in turn cause several deficiencies. To solve an iron deficiency, avoid watering with fertilisers that contain high concentrations of Mn, Zn and Co, and also reduce the PH level of the nutrient solution to 6.0-6.5.
Boron: A boron deficiency causes the borders of the leafs to dry and brown, while the shoots are twisted. In the case of an over-fertilisation, the leaves suffer necrosis, causing a severe defoliation on the plant.
Chlorine: A deficiency of this element is rare when using tap water. The leaves take a very characteristic bronzed colour. The symptoms are the same in the case of an excess of chlorine.
PH table and nutrient assimilation
Copper: This element is actively involved in the metabolism of the plant and in the creation of carbohydrates, also helping in the production of sugars and proteins. In the case of a deficiency, this must be treated by watering with a mineral fertiliser rich in copper.
Excesses of copper, even slight ones, are very toxic. The first symptom is iron chlorosis along with overall slow growth of the plants.
Cobalt: It’s difficult to find deficiencies or excesses of cobalt since it is not very important for the development of the plant during its life cycle. When problems of deficiencies or excesses of this element happen, nitrogen will no longer be available for the plants.
Molybdenum: To find deficiencies of this element in cannabis crops is also difficult, since plants need it in very small quantities. When there is a lack of this element, nitrogen uptake is reduced, roots stop their growth and leafs become twisted. An excess of this element, causes plants to show deficiencies of copper and iron.
Silicon: Deficiencies of this mineral in cannabis plants are rare too. A deficiency is detectable by the deformation of new young leaves and an overall decrease of the final weight of the flowers.This post shows the main deficiencies and excesses of macro and micro-nutrients that can affect our cannabis plants during their cultivation. If you d ]]>