Categories
BLOG

low stress training autoflower

When To Start Low Stress Training (LST) Your Autoflower

Low-stress training is a plant training technique used to train cannabis plants into the desired shape to maximize light usage and yields, among other benefits.

LST allows growers to control height and maximize yields without having to invest in new growing equipment and with relatively little work.

1. What is Low Stress Training?

Low stress training (also known as LST) is a technique used to train your weed plant into the desired result using the lowest amount of stress possible. There are also High stress training (HST) techniques like topping or pruning but we won’t be talking about them here as they tend to stunt growing for a short period of time and cannot be used with autoflowers as they have a determined life cycle.

2. When to Start Low Stress Training

There isn’t an exact age or size to start LST’ing autos, in theory, you can start as soon as the first true leaves grow, we recommend start training as soon as your plant can reach the edge of the pot, around 10-15cm or 4 – 6 inches (use this as a guideline, it mainly depends on the structure of your plant more than the size).

Before starting, you need to be sure you’ll benefit from it as it may have a toll on your autoflower, read a bit on how to LST autos, and always remember that you should not LST during flowering because it will stress your plant and decrease the yields.

Any kind of stress (even from overwatering) can ultimately ruin your harvest so make sure you really need to do it before starting any plant training method.

3. Why use LST?

LST is used to maximize output yield, maximize light usage, decrease the vertical space needed or just to control stretching using the least amount of stress possible.

Training Method Advantages
Tie-down Gives you the ability to control stretch and mold your plant anyway you want and need.
SCRoG Suited to even the canopy and increase the number of bud sites.
SoG Used to maximize limited growing spaces.

We recommend starting slowly training this autoflower at around week 3 and stop when you can’t notice any more growth, at this stage, she will only focus on bud production.

At Fast Buds we offer a wide variety of strains that perform outstandingly with LST, we particularly recommend one of our most popular strains to date Zkittlez Auto among others.

She develops a large main cola and a few lateral side branches, she tends to take a lot of nutrients resulting in a sturdy strain that will respond nicely to training and will grow multiple hefty colas throughout the plant.

TIP: When performing LST, start slowly and be careful not to hurt your plants. The best way is to bend it a little each day in order to get the least amount of stress, be patient, and don’t overdo it!

Maximize Yield Output

The overall yield of your autoflower plant can be increased by using LST, more light will get to the foliage, thus producing more food and resulting in denser buds.

More Dense Buds

Normally LST is needed to make buds on the lower branches denser, if no LST is performed you would need another light source. This is one of two ways of maximizing the overall yield when harvesting and also saving a couple of bucks.

Get Light to Lower Branches

Getting light to lower branches is another way to maximize yield and is especially good to perform with autoflowers because they tend to be smaller and bushier so this would result in not only more bud but also a better-looking plant overall.

Decrease Space Needed

Normally growers have a limited space to grow their autoflowers, this method is used to control the space your plant takes, especially if you have multiple plants in a small space. The best way to control space is by using the SCROG method and Tie down method will be explained in detail in the next topics.

Control Stretching

Sometimes when autoflowers don’t get enough light they tend to stretch and can get very bad, resulting in aery buds and can end up taking too much space.

Have in mind that you can also perform LST outdoors but usually is not needed because your plants aren’t limited by space.

4. Additional Recommendations and LST Techniques

have in mind that there isn’t such thing as the most effective LST for cannabis plants, there are several methods used when low-stress training such as SCROG, and the Tie-down method, and they should be used according to how your plants grow.

Both of them will have similar results and can be used for achieving what we covered earlier.

The Tie Down Method

The Tie-down method consists of making holes on the edge of your pot and use any kind of string (must be flexible) to bend and hold down your plant, usually starting with the main branch, your goal is to level all branches to the main cola.

For this plant training method we highly recommend trying out our Lemon Pie Auto, this high yielder can produce up to 550gr/m2 and develops a great structure with great internodal spacing that allows you to comfortably tie down the branches, increasing the yields.

By properly bending down the branches and shaping your cannabis plant, you will reach a structure similar to what you would get with a SCRoG net.

She is so heavy had to lay the plant on its side to cut and remove trellis so her branches and even main stem did not split. Sticky as she can be, had to clean hands and trimmers (eyes once lol) many times for just a light trim. Easy trim Excellent plant Fast Buds. – HisHope

The tie-down method doesn’t necessarily need to be used to even out your canopy, you can shape your plants either way you want, even just for controlling their height if you have a limited growing space.

Doing it properly will allow your plant to develop multiple bud sites that get equal amounts of light and result in better quality and bigger yields.

Pros

  • Easy and cheap.
  • No planning necessary.
  • No problem when moving your plants around.

Cons

  • You will have to tie each branch individually throughout your plant’s vegetative stage, which can be time-consuming.

The Screen of Green (SCROG) Method

The Screen of Green consists of using a net or type of screen, similar to a volleyball net, used to maintain branches to the same height by bending and holding the branches down.

This is a great method to spread out the canopy and take full advantage of your growing space, by spreading out the canopy your plant will develop bud sites that will get just the right amount of light to fatten up nicely.

One important element when talking about SCROG is genetics, depending on the plant structure you can have different results because some strains work better in this type of setup.

When Scrogging, it’s better to use one strain at a time and preferably a strain that grows shorter and with a lot of flowering sites.

Vertical SCRoG

A vertical SCROG is the best way to maximize your growing space, this method works by having a SCRoG net vertically that extends on to the sides of your growing tent.

By doing it this way you allow your plants to grow more bud sites and absorb all the light emitted by your light fixture, reducing light waste and enhancing your yields even more.

I have also used some more paper clips (XL sized ones) to pull side branches to the main stem, it works pretty darn well in keeping the plant upright because these buds are getting extremely heavy – some of the branches could not hold them up anymore. This also sort evened the canopy out a little, which is great of course. I think this will be a good harvest! – FrankieBones

Orange Sherbert Auto performs extremely well with LST techniques thanks to her Sativa heritage, perfect for vertical Scrogging. This lady is one of our tallest hybrids reaching up to 150cm (around 60in) and yielding up to 600 gr/m2 (1.3lb) therefore low-stress training is not only advised but recommended.

Low-stress training is a plant training technique used to train cannabis plants into the desired shape to maximize light usage and yields, among other benefits.