How To Decarb Weed: 5 Most-Used Ways To Weed Decarboxylation
Unless you’ve been living under a rock, you are probably quite familiar with the many potential health benefits of cannabis. Whether you prefer to harness the benefits of the THC in weed or the CBD, it’s important that you understand the basic science behind preparing cannabis for human consumption.
There are many methods of processing pot to make it usable for humans. From curing the buds to extracting the essential oils of the plant, there are plenty of things you can do to your harvested plants.
One of these things is decarboxylation. If you are curious about what the decarboxylation weed process is – or want to know how to decarb weed for yourself at home – look no further than our helpful guide.
What is “Decarbing”?
Decarbing, or decarboxylation, is a chemical reaction that is used to make cannabis edibles more potent. It essentially turns THCA, a chemical that is not psychoactive, into THC – the chemical that we all know and love for its myriad mental benefits.
Cannabis contains THCA instead of THC before the heating or smoking process, so if you plan on eating cannabis in an edible of some sort, you need to decarboxylate it first. Although it sounds complicated and highly scientific, don’t worry -it’s actually quite easy to do and simply involves subjecting your pot to super-high temperatures of around 250 degrees.
There are several ways you can decarboxylate weed. Here are some of your options.
How to Decarb Weed
In a moment, we will walk you through all the steps involved in decarbing weed. Before you get started, however, make sure you have broken your weed down into smaller pieces. You have a couple of options here. You can either break them up by hand, using your fingers to gently break buds into small pieces.
An alternative to using your fingers to break up the weed is to grind them with a food processor or a commercial weed grinder. This will allow the buds to be broken down into a finer consistency – which is often desired if you are using weed for edibles.
Ready to get started? Here are several options for how to decarb your own weed at home.
The Best Way to Decarb Weed: The Baking Sheet Method
Using a baking sheet to decarb weed is the most commonly used method of decarbing weed snce it is both quick and efficient.
However, it’s a rather smelly way to decarboxylate weed. To do this, you will need to preheat your oven to 250 degrees. Line your baking tray with parchment paper and then place your ground weed on the sheet. Bake it for half an hour or until it has turned to a brown color. That’s all there is to it!
How to Decarboxylate Weed the Natural Way
If you don’t want to get super technical or invest a lot of time in decarbing your weed, you do have one simple alternative – you can decarboxylate your weed the natural way.
If you let weed sit around long enough, it will eventually start to decarb on its own – you just have to wait a very long time.
This method isn’t used very often because it takes so long, but if you are interested in experimenting and don’t have to to lose, you might as well give it a try! All you need to do is stash some jars of the clouds in your cupboard and wait for it to decarboxylate on its own.
How to Decarb Cannabis Using Oven Bags
If you have some extra oven bags lying around after Thanksgiving, you might want to give this method a go. It works just like the baking sheet method of decarboxylating weed, but requires less work. You don’t need to buy a baking sheet either.
To do this, simply preheat your oven to about 250 degrees. Put your weed in the bag and tie the top of the bag (this will keep the smell more contained than if you had the buds spread out on a baking sheet).
Place your bag on a baking sheet and then bake for thirty minutes. As with the baking sheet method, you will find that your weed changes to a brownish shade.
How to Decarb Weed With Mason Jars
Mason jars can be used for so many things, from canning jelly to DIY-ing candles. And they can even be used for decarbing weed! This is the best decarboxylation method if you already have a ton of these jars lying around the house.
All you need to do is preheat your oven to 250 degrees. Place your cannabis in a mason jar and fasten the lid tightly to prevent smells from escaping. Gently slide the mason jar onto a rack in the oven – just make sure you are using an oven-safe mason jar and the jar is not touching any heating elements in your oven.
Bake the jars for half an hour. Again, your cannabis will be brown when it is done.
Using a Machine for Decarboxylation of Weed
There are even machines out there that you can use to slowly and effectively decarb your weed. These machines are relatively expensive and take some time to work – up to two hours – but the beauty of them is that you can put the buds in and just walk away. Plus, there is no smell – meaning it allows for more discreet decarbing in your home. In addition, it’s an easy way to decarb weed without oven facilities or other equipment handy.
Why Do We Need to Know How to Decarb Weed?
In short, knowing how to decarb cannabis will open your products up to a whole new market of people. Decarbing is what makes edibles work, and without it, you can’t sell any kind of edible.
It might seem counterintuitive to cook your pot – after all, many people (erroneously) believe that this makes the buds less potent. However, that’s far from the case.
If you don’t decarb your buds before eating them, you aren’t going to achieve any kind of psychoactive effect. You might as well just eat the bag that you stored them in!
Luckily, decarbing weed is easy to do – as long as you follow one of the simple methods we’ve outlined above.
Alan has always been passionate about plants and gardens. With the help of his son, Alex, and 3 other awesome people who aren’t just passionate but are titled professionals in different fields, Alan wishes to always give you the best and the latest updates with regards to gardening and products and techniques– for FREE.
- By Alan Wood
- Updated August 3, 2020
It’s not a luxury that everybody in the world can enjoy, but if you want to learn how to grow…
- By Francisco
- Updated May 21, 2020
Nowadays, the choice of what to grow or what to smoke is ever-expanding. With advancements in genetics, even seeds are…
- By Alan Wood
- Updated April 22, 2020
Growing marijuana indoors doesn’t require a massive green thumb or a tremendous volume of knowledge on how to grow pot….
- By Alan Wood
- Updated April 11, 2020
You’ve spent months manicuring your cannabis garden, spending hours fertilizing, weeding, watering, and monitoring your plants. You’re hoping for a…If you want to produce marijuana for edibles, then you need to know how to decarb your weed. Here are several steps to take.
Quick and Easy Decarboxylation Methods
So you’ve probably heard the word “decarboxylation” being thrown around a lot lately, but what does it mean exactly?
Decarboxylation is the step before the infusion step where it is turned into a cannabis-infused butter or oil. It is highly recommended that you decarboxylate marijuana before you consume it through food. This process releases the molecule A from THC-A to become THC which makes it psychoactive. When you roll one up and smoke it, the heat from the flame causes decarboxylation. But when it comes to cooking and baking, it becomes a whole other process. Have no fear, it’s actually quite simple using the methods in this article.
For a more in-depth explanation of the decarbing process and a quick cannabutter recipe, check out my previous article: https://myedibleschef.com/the-weed-decarboxylation-process/
The microwave method
Place your bud, whole or ground, in a microwave safe bowl & cover it with a turkey roasting bag. Microwave for 1 minute and 30 seconds, repeat 3 times. This method holds in all the flavors and aromas for a far superior flavor and also to prevent your house from smelling like a grow-op! The microwave is also the only oven that does not “brown” so it’s almost impossible to scorch your bud.
Sous vide your weed
That’s right, you can put your ground weed in a vacuum-sealed bag. Place it in a 212°F/100°C water bath for about 1 hour and voilà! All the decarbing action with zero mess or smell. This method is very convenient since you can use a timer to set and forget it.
You can also use the sous vide method to infuse your weed with fats or alcohol.
Kill two birds and get stoned with this all-in-one method. Lay out some graham crackers, split them in half, spread some nut butter of your choice (peanut, almond, chocolate hazelnut, etc.) onto one half, then sprinkle the desired amount of ground up weed onto the nut butter. Sandwich with the second half of the graham cracker, individually wrap them in tin foil and bake them in a 325°F/160°C oven for 25-30 minutes. These will be the easiest edible you ever make!
Experimentation is everything, there are many ways to decarb but these are just some of the quick, easy and less fuss methods. Every new batch of the bud is going to be slightly different. Some may be drier or some may be more moist and sticky. Use your discretion during the process of decarboxylation, and always remember, practice makes perfect. Happy Decarbing!Quick and Easy Decarboxylation Methods So you’ve probably heard the word “decarboxylation” being thrown around a lot lately, but what does it mean exactly? Decarboxylation is the step before ]]>